Monday, April 30, 2012

New Air Pressure Regulator 100 CFM 1/2" w/ Free Gauge & Free Shipping

New Air Pressure Regulator 100 CFM 1/2" w/ Free Gauge & Free Shipping Review



New Air Pressure Regulator 100 CFM 1/2" w/ Free Gauge & Free Shipping Feature

  • New 1/2" Air Pressure Regulator 100 CFM Tri Star Series w/ free gauge
  • Free Shipping & Free Gauge
  • Arrow Pneumatics
  • 10 - 175 psi standard setting on regulator
  • 10 -250 psi with high pressure spring, contact us if you need High pressure spring
? Micro finished brass seat to ensure no reduced pressure creep ? Reinforced diaphragm for repeated accuracy ? Minimal pressure drop due to efficient aspiration ? Three position non-rising adjustment knob; push to lock, pull to adjust, detach to make tamper resistant ? Relieving style standard ? Easily panel mounted ? Tamper-proof cap included ? In-Line or modular installation ? High scfm flow due to efficient aspiration


Friday, April 27, 2012

Mini Series Pressure Regulator

Mini Series Pressure Regulator Review



MP514803 Regulating a consistent output pressure is important for proper tool operation no matter what task you are performing. This mini - series pressure regulator has an easy locking pressure knob so that you can regulate the output pressure from 0 to 125 PSI. Providing a pressure gauge from 0 to 160 PSI and a self-relieving design that vents downstream air flow, this pressure regulator is sure to make your air tool uses easier. Includes a 1 year limited warranty. Features: - Locking pressure knob to prevent accidental pressure changes - Provides regulated output pressure - Easy to read 0 to 160 PSI pressure gauge - Has 15 SCFM flow capacity at 90 PSI - 1/4'' NPT(F) ports - Weight: 0.42 lbs. - Dimensions: 6.8'' H x 2'' W x 2'' LD


Wednesday, April 25, 2012

Campbell Hausfeld PA2121 Standard Air Filters

Campbell Hausfeld PA2121 Standard Air Filters Review



Campbell Hausfeld PA2121 Standard Air Filters Feature

  • Removes unwanted dirt particles and condensed water to extend tool life
  • 5 micron element provides maximum filtration
  • Metal bowl-guard protects against impacts
  • Quick release bowl and quarter turn drain for easier use
  • 57 SCFM flow capacity at 90 PSI
3/8" Compressor Airline Filter, Removable Filter Element, Pressure Range 20 To 150 PSI, 1 To 10 Scfm Volume Range.


Tuesday, April 24, 2012

1/4"NPT Pneu Regulator 0-250 Pressure Range 86 Max CFM,1/4 Gauge Port

1/4"NPT Pneu Regulator 0-250 Pressure Range 86 Max CFM,1/4 Gauge Port Review



1/4"-ARO-Regulator. Provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the compressed air system. Relieving models vent downstream overpressure. Supplied with gauge 0-160 range. Pressure range 5-125. Max cfm 100, gauge port 1/4". Max inlet pressure 200 psi


Monday, April 23, 2012

Delta Faucet 75152 Water Amplifying Adjustable Showerhead with H2OKINETIC Technology, Chrome

Delta Faucet 75152 Water Amplifying Adjustable Showerhead with H2OKINETIC Technology, Chrome Review



Delta Faucet 75152 Water Amplifying Adjustable Showerhead with H2OKINETIC Technology, Chrome Feature

  • Water- and energy-saving shower head
  • Patented motion of water will not clog up from minerals in water
  • Metal ball connector for durability
  • Easy installation process
  • Operates at 1.85 gallons per minute, yet feels like more
Offering water efficiency without sacrificing comfort, the Delta H2OKinetics Showerhead can lower your utility bills while still providing full-spray performance. This showerhead meets WaterSense criteria by offering two flow rates and two spray patterns. Its four large spray holes are engineered to be anti-clog and easy to clean.

callout box top
H2OKinetics Showerhead
At a Glance:
  • Water-saving showerhead offers low-flow spray pattern that feels like traditional flow

  • Dual flow settings operate at 2.5 or 1.85 gallons per minute

  • Volume-control lever on showerhead makes it easy to switch settings

  • H2OKinetics technology delivers 36% less water than standard showerheads

  • Spray holes won't clog from mineral deposits for easy cleanup

  • Lifetime faucet and finish warranty
callout box bottom
Delta H2OKinetics Showerhead
The H2OKinetics Showerhead can lower
your utility bills while still providing
full-spray performance. View larger.
Meets WaterSense Requirements for Water Savings
H2OKinetics meets the EPA's stringent WaterSense criteria, which means it's water efficient and can help save money on your utility bills. Launched in 2006, WaterSense is an EPA-sponsored partnership program that seeks to protect the future of the nation's water supply by promoting water efficiency.

Save Water Without Sacrificing Comfort
This dual setting showerhead operates at 2.5 or 1.85 gallons per minute, offering a high-volume spray and a water-saving comfort spray. A convenient volume-control lever adjusts the water settings.

To save on utility bills, proprietary H2OKinetics technology delivers 36 percent less water than standard showerheads, yet the water flow still feels like a traditional shower--and the larger droplets feel warmer longer.

User-Friendly Design with Clog-Free Holes
Designed to be user-friendly, the H2OKinetics showerhead has a contemporary design with four large spray holes. Internal engineering guarantees that the spray holes will not clog up, which means cleanup is a snap. A metal ball connector ensures durability.

About Delta Faucets
Delta faucets started out as a new innovation that won wide approval, and over the years, a consistently high level of quality has validated their reputation. Manufactured to meet federal, regional and local specifications, Delta faucets offer abundant replacement parts, a comprehensive warranty, and confidence earned through a punishing regimen of durability testing. Handles are turned on and off 500,000 times to ensure leak-proof performance for years. And before it leaves the plant, every faucet undergoes more than 100 hand inspections, including air and water testing.

The H2OKinetics showerhead is backed by Delta's lifetime faucet and finish warranty.

What's in the Box
H2OKinetics showerhead, hardware, and installation guide.



Sunday, April 22, 2012

3/8"NPT 1Pc Pneu Filter/Regulator 0-140 Pressure Range 1/8 Gauge Port

3/8"NPT 1Pc Pneu Filter/Regulator 0-140 Pressure Range 1/8 Gauge Port Review



Combined air filtration and regulation in a single, compact unit. Saves space for added system design flexibility. Piggyback filter regulators supplied with pressure gauge. Bowl guard has full length slots for easy visual checking of lubricantIncludes poly bowl with guardNote: Port size and gauge port in NPTMax Inlet Pressure: 125 psiPressure Range: 5-125 psi


Saturday, April 21, 2012

Watts Regulator Temperature and Pressure Relief Valve 40XL-5, 3/4" (0156731)

Watts Regulator Temperature and Pressure Relief Valve 40XL-5, 3/4" (0156731) Review



Watts Regulator Temperature and Pressure Relief Valve 40XL-5, 3/4" (0156731) Feature

  • Watts
  • 40XL-5
  • Temperature & Pressure Relief Valves
Product can not ship to California, Vermont, and outside United States. Watts Regulator Temperature and Pressure Relief Valve 40XL-5, 3/4" (0156731)Series 40L, 40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model 40L has a short thermostat for installation directly in available tank tapings. Model 40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series 40L, 40XL valves are ASME rated and CSA listed. Temperature Relief: 210;F (99;C), Pressure Range: 75 to 150psi (5.2 to 10.3 bar), Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).Watts Regulator Temperature and Pressure Relief Valve 40XL-5, 3/4" (0156731) Features:; 3/4, 1 in.. (20, 25mm); Bronze body construction; Non-mechanical seat-to-disc alignment; Thermostat is accurate and proven. Exclusively designed and manufactured by Watts; Tamper-resistant bonnet screws; Series 40 and 140 feature a unique thermostat with a special thermo-bonded coating; Series 140 sizes 1" (25mm) and above are standardly furnished with stainless steel thermostat tube* Not AB1953 CA/VT Compliant


Friday, April 20, 2012

MAXITROL 325-3L (1/2" W/12A09) Regulator,Gas Pressure

MAXITROL 325-3L (1/2" W/12A09) Regulator,Gas Pressure Review



Gas Pressure Regulator, Lever-Acting Line, Pipe Size 1/2 In, FNPT Connection, Max Inlet Pressure 2 PSI, Outlet Pressure Range 7-11 In WC, Inlet Emergency Exposure Limits 65 PSI, Ambient Temp Limits -40 To 205 F, Max Load 140,000 Btu/hr, Capacity 250,000 Btu/hr, Horizontal Upright Mounting Position, Venting 1/8 In NPT, Cu-Ft/Hr @ 03 30 In WC) Pressure Drop, Includes Vent Limiter, Standards CSA Designed Certified Z21.80 / CAN 6.22


Wednesday, April 18, 2012

Uniweld RHP400 400 PSI Nitrogen Regulator

Uniweld RHP400 400 PSI Nitrogen Regulator Review



Uniweld RHP400 400 PSI Nitrogen Regulator Feature

  • Designed for nitrogen use purging and pressure testing with high pressures
  • Includes easy to read 2 inch gauge and is made of heavy duty brass construction
  • Backed by a 2 year warranty on material and workmanship
Uniweld 400 PSI Nitrogen Regulator is designed for purging and pressure testing with high pressures. It features large T handles for easy pressure adjustment and A CGA580 inlet and quarter inch flare outlet connection. This tool also includes easy to read 2 inch gauge and is made of heavy duty brass construction. This tool which is for use with nitrogen is backed by a 2 year warranty on material and workmanship.


Tuesday, April 17, 2012

Air Pressure Regulator

Air Pressure Regulator Review



Air Pressure Regulator Feature

  • Air Pressure Regulator
Air Pressure Regulator


Monday, April 16, 2012

Interstate Pneumatics W1130 1/4 Inch Mini Zinc Regulator

Interstate Pneumatics W1130 1/4 Inch Mini Zinc Regulator Review



Interstate Pneumatics W1130 1/4 Inch Mini Zinc Regulator Feature

  • Port Size: 1/4"
  • Body Material: Die Cast Metal Body
  • Max Inlet Pressure: 300 PSI
  • Delivery Pressure: 0-125 PSI
  • Flow @ 100 PSI: 16 SCFM
Pneumatic equipment that operates at higher than recommended pressure can cause excess torque, force and wear and can waste compressed air. This unit regulates air pressure of the air line to prevent damage. Features three position non-rising knob: push to lock, pull to adjust, detach to make tamper resistant. Increases or decreases air pressure as desired. Provides fine air control for spray guns and air tools. It adopts balanced inlet with relief device. It has the advantage of stable pressure, high precision, quick reaction & firm lockup. It can be freely combined with other air source treatment products.


Saturday, April 14, 2012

Acetylene Regulator Low Pressure for Oxy-Acetylene Welding

Acetylene Regulator Low Pressure for Oxy-Acetylene Welding Review



Acetylene Regulator Low Pressure for Oxy-Acetylene Welding Feature

  • Stable line pressure regardless of bottle pressure
  • Copper-Nickel filter protects high pressure seat
  • Reinforced laminated neoprene diaphragm
  • Auto reset relief valve
  • 3 year warranty
These regulators are manufactured using the latest technology. Dual diaphragm assures stable line pressures. Filtered high pressure seat does away with Decay-Rise.


Friday, April 13, 2012

WATTS 1/2 26AA Pressure Regulator,1/2 In,1 To 25 PSI

WATTS 1/2 26AA Pressure Regulator,1/2 In,1 To 25 PSI Review



Pressure Regulator, For Water And # 2 Fuel Oil, Inlet/Outlet 1/2 In, FNPT Connection, Max Water Pressure 300 PSI, Max Temp 140 F, Material of Construction Brass, Height 5 In, Length 2 In, Pressure Regulation 1 To 25 PSI


Thursday, April 12, 2012

2 Quart Pressure Pot & Gun with Hoses, 2.0 Spray Gun

2 Quart Pressure Pot & Gun with Hoses, 2.0 Spray Gun Review



2 Quart Pressure Pot & Gun with Hoses, 2.0 Spray Gun Feature

  • Standard Nozzle: 2.0 mm and Operating Pressure: 30 to 45 PSI (2.0 to 3.0 bar)
  • Pattern Width: 7.1" to 9.1" (180 to 230 mm)
  • Air Consumption: 6.0 to 8.8 CFM (170-250 l/min)
  • Paint Pot Capacity: 2-1/2 Gallons (Aprox. 10 Liters)
  • Includes Fluid pressure regulator with gauge
Excellent for Production Painting or Situations where a large amount of spraying is required such as Commercial Trucks, Vans, Buses or for Architectual and Industrial Finishing! Can be used with a broad range of coatings like Automotive, Oil Based, Latex, Varnishes, Primers, and More! This Pressure Pot Spray System gives you the benefit of storing a large volume of paint that can be applied rapidly, saving you time and money! Air inlet: 1/4" Fluid inlet: 3/8" Fluid Pressure Regulator w/Gauge: Permits accurate settings Air Pressure Relief Valve for Safety. Includes Instruction Manual and One Year Warranty


Wednesday, April 11, 2012

Single Unit Air Compressor Line Filter Regulator

Single Unit Air Compressor Line Filter Regulator Review



Single Unit Air Compressor Line Filter Regulator Feature

  • Single Air Filter Regulator Unit
  • 3/8" Air Inlet
  • Use Pressure: 147 PSI
  • Endure Pressure: 220 PSI
  • Working Pressure: 14.7 to 102 PSI
Temperature Range: 41-140 Degrees Farenheit. Maximum Pressure of 9.9 kgf/cm2. Case Material: P.C. Site close to unit to be protected as possible


Tuesday, April 10, 2012

Pneumatic Filter Regulator Lubricator w Pressure Gauge

Pneumatic Filter Regulator Lubricator w Pressure Gauge Review



Pneumatic Filter Regulator Lubricator w Pressure Gauge Feature

  • Product Name: Pneumatic Regulator; Model: AFC-2000; Material: Metal, Plastic; Working Medium: Air
  • Max. Pressure: 9.9kgf/cm2; Adjustable Pressure Range: 0.5 - 9.0kg/cm²; Weight: 318g
  • Thread Hole Diameter: 11mm/ 0.43"; Total Size: 15 x 9 x 5cm/ 5.9" x 3.5" x 2" (L*W*T);
  • Pressure Gauge Connector Dia: 9.5mm/ 3.7"; Pressure Gauge Range: 0 - 10 kg/cm², 0 - 1 MPa
  • Pressure Gauge Size: 4.1 x 3.9cm/ 1.6" x 1.5" (D*T); Package Content: 1 x Regulator, 1 x Gauge
Features the adjustable pressure is 0.5-9.0 kg/cm², max pressure is 9.9kg/cm². Air source treatment unit includes filter, regulator, filter regulator, and lubricator, or their combined dyad or triplet. It is in standard modular design and can freely separate and combine. Also with pressure gauge. Lubricator is an element that can provide good lubrication for pneumatic system, with novel structure and easy adjustment of oil drip.